Stainless steel plates

Abrasion Resistant Steels

ASH 80 (Semi-Manax)
Wear resisting plates with 200-260 HB with inspection certificate acc. to DIN EN 10204/ 3.1

Thickness 3 – 15 mm
Width 1.000 – 1.500 mm
Length 2.000 – 12.000 mm

Area of application: Wear stressed construction parts, for example screen plants
ASH 90 corresponding material number 1.8704
ASH 90 corresponding material number 1.8704, min. 265 HB, with inspection certificate acc. to DIN EN 10204/ 3.1

Thickness 5 – 60 mm
Width 1.000 – 3.000 mm
Length up to 12.000 mm

Area of application: Wear stressed construction, which are mainly underlie friction and subsequently wear, with good weldability and ductility, for example earthmoving equipment, mining machines, sliding plates, mixed and transport systems
Brinar®400
Brinar®400 or equal (1.8714), min. 360 HB, with inspection certificate acc. to DIN EN 10204/ 3.1

Thickness 3 – 120 mm
Width 1.000 – 3.000 mm
Length up to 12.000 mm

Area of application: High wear stressed construction like earthmoving equipment, mining machines, dumper trucks, scrap press, crushing plants
Brinar®500
Brinar®500 or equal (1.8734), min. 450 HB, with inspection certificate acc. to DIN EN 10204/ 3.1

Thickness 5 – 50 mm
Width 1.000 – 3.000 mm
Length up to 12.000 mm

Area of application: See also Brinar®400
TektoSal®400/ ASH 400
TektoSal®400/ ASH 400, min. 340 HB, hot rolled plate from strip for laser cutting

Thickness 5 – 12 mm
Width 1.000 – 2.000 mm
Length 1.500 – 12.000 mm
Brinar®400CR
Brinar®400CR, min 340 HB, tempered by air, with inspection certificate acc. to DIN EN 10204/ 3.1

Thickness 6 – 20 mm
Width 1.000 – 3.000 mm
Length up to 12.000 mm

Area of application: See also Brinar®400
Brinar®480CR
Brinar®480CR, min. 370 HB, wear resistant even at higher temperatures up to 500°C

Thickness 6 – 25 mm
Width 1.000 – 3.000 mm
Length up to 12.000 mm

Quenched and tempered fine grain steels

S 690 QL 1 (1.8988)/ S 690 QL (1.8928)
S 690 QL 1 (1.8988)/ S 690 QL (1.8928) acc. to DIN EN 10025 part 6, with inspection certificate acc. to DIN EN 10204/ 3.1

Thickness 4 – 200 mm
Width 1.000 – 3.000 mm
Length up to 12.000 mm

Area of application: Highly stressed construction for example crane arms, frame construction, side member, earthmoving equipment and lifting machines
S 960 QL (1.8933) and S 890 QL (1.8983)
S 960 QL (1.8933) and S 890 QL (1.8983) acc. to DINEN 10025 part 6, with inspection certificate acc. to DIN EN 10204/ 3.1

Thickness 5 – 60 mm
Width 1.000 – 3.000 mm
Length up to 12.000 mm

Area of application: See also S 690 QL

Normalized fine grain structural steels for pressure vessels

P 355 NL 2 (1.1106)/ P 355 NH (1.0565)
P 355 NL 2 (1.1106)/ P 355 NH (1.0565)
P 460 NL 2 (1.8918)/ P 460 NH (1.8935) acc. to DIN EN 10028 part 3, with inspection certificate acc. to DIN EN 10204/3.2 TÜV and 3.1, with hot tensile test at +400° C

Thickness 5 – 200 mm
Width 1.000 – 3.000 mm
Length up to 12.000 mm

Area of application: Pressure gas vessels, pressure vessels, boiler parts, pressure pipe lines, highly stressed welded construction in heavy machine construction, bridge and steel construction

Specials: Certified acc. to ASTM/ASME – code ASTM A 516 Gr.70
S 355 NL (1.0546)
S 355 NL (1.0546), S 460 NL (1.8903) acc. to DIN EN 10025 part 3, with inspection certificate acc. to DIN EN 10204/ 3.1

Thickness 5 – 120 mm
Width 1.000 – 3.000 mm
Length up to 12.000 mm

Area of application: See also P 355 NL2

Steels for cold forming

S 420 MC (1.0980)
S 420 MC (1.0980) acc. to DIN EN 10149 part 2, with inspection certificate acc. to DIN EN 10204/ 3.1
Type: Surface after rolling or pickled and oiled

Thickness 3 – 20 mm
Width 1.000 – 1.500 mm
Length 2.000 – 3.000 mm

Area of application: Cold forming components in different ways for example vehicle frame, axle construction and special profiles
S 460 MC
S 460 MC (1.0982)/ S 500 MC (1.0984) acc. to DIN EN 10149 part 2, with inspection certificate acc. to DIN EN 10204/ 3.1
Type: Surface after rolling or pickled and oiled

Thickness 3 – 20 mm
Width 1.000 – 1.500 mm
Length 2.000 – 3.000 mm

Area of application: See also S 420 MC
S 700 MC (1.8974)
S 700 MC (1.8974) acc. to DIN EN 10149 part 2, with inspection certificate acc. to DIN EN 10204/ 3.1

Thickness 2 – 20 mm
Width 1.000 – 3.000 mm
Length up to 12.000 mm

from coil
Thickness 2 – 15 mm
Width up to 2.000 mm
Length up to 16.000 mm

Area of application: Weight saving manufacturing of construction for vehicle and crane construction

Heat-resistant steels

P 295 GH (1.0481)
P 295 GH (1.0481) and P 355 GH (1.0473) acc. to DIN EN 10028 part 2, with inspection certificate acc. to DIN EN 10204/ 3.1

Thickness 5 – 50 mm
Width 1.000 –3.000 mm
Length up to 12.000 mm
16 Mo 3 (1.5415
16 Mo 3 (1.5415)
13 Cr Mo 4-5 (1.7335)
10 Cr Mo 9-10 (1.7380) acc. to DIN EN 10028 part 2, with inspection certificate acc. to DIN EN 10204/ 3.2 TÜV und 3.1

Thickness 2 – 200 mm
Width 1.000 – 3.000 mm
Length up to 12.000 mm

Area of application: pressure vessels, steam-boiler plants, pressure pipe lines

Specials: Certified acc. to ASTM/ASME – code ASTM A 387 Gr. 11 Cl. 2 ASTM A 387 Gr. 12 Cl. 2 ASTM A 387 Gr. 22 Cl. 2

Steels for quenching and tempering

C 45 (1.0503) and C 45 E (1.1191)
C 45 (1.0503) and C 45 E (1.1191) acc. to DIN EN 10083, with inspection certificate acc. to DIN EN 10204/3.1

Thickness 2 – 200 mm
Width up to 3.000 mm
Length up to 12.000 mm

Area of application: Engineering, mold construction, tool manufacture
42 Cr Mo 4 (1.7225)
42 Cr Mo 4 (1.7225) acc. to DIN EN 10083 with inspection certificate acc. to DIN EN 10204/3.1

Thickness 2 – 200 mm
Width 1.000 – 3.000 mm
Length up to 12.000 mm

Area of application: See also C 45

Tool steels

C 45 U (1.1730)
C 45 U (1.1730) acc. to EN ISO 4957, with inspection certificate acc. to DIN EN 10204/3.1

Thickness 6 – 150 mm
Width 1.000 – 3.000 mm
Length up to 12.000 mm

Area of application: Engineering, mold construction, tool manufacture, automotive industry

Material-number 1.2311 alloyed tool steel, quenched and tempered, with inspection certificate acc. to DIN EN 10204/3.1

Material-number 1.2842 acc. to EN ISO 4957, annealed, hardness < 230 HB, with inspection certificate acc. to DIN EN 10204/3.1

Material-number 1.2085, quenched and tempered, with inspection certificate acc. to DIN EN 10204/3.1
Material-number 1.2312
Material-number 1.2312 acc. to EN ISO 4957, quenched and tempered to 280-325 HB, with inspection certificate acc. to DIN EN 10204/3.1

Thickness 10 – 120 mm
Width up to 2.500 mm
Length up to 7.000 mm

Area of application: See also C 45 U

Case hardening steels

16 Mn Cr5 (1.7131)/ 20 Mn Cr5 (1.7147) acc. to DIN EN 10084 with inspection certificate acc. to DIN EN 10204/3.1

Thickness 3 – 200 mm
Width 1.000 – 3.000 mm
Length up to 12.000 mm

Area of application: Engineering, mold construction, tool manufacture


Structural steels with improved atmospheric corrosion

COR-TEN B/S355 J2 W + N (1.8965) acc. to DIN EN 10025 part 5, with inspection certificate acc. to DIN EN 10204/3.1

Thickness 2 – 50 mm
Width 1.000 – 3.000 mm
Length up to 12.000 mm

Area of application: Welded, screwed and riveted construction in different ways, for example steel structural engineering, bridge construction, tank construction, in exhaust system and vehicle construction


Saw cutting

On our efficient log band saws we manufacture bars, merchant bars or cutting parts from plates.

Range of dimension
Thickness: 6 – 360 mm
Min. width: 120 mm
Max. width: 1.600 mm
Min. length: 500 mm
Max. length: 7.000 mm
Example for tolerances: - 0 /+ 2 mm

All higher grades are available in sawn execution.


Stainless steel plates

Furthermore in our product range

1.4301 / 1.4307 AISI 304 / 304 L
1.4541 AISI 321
1.4571 AISI 316 Ti
1.4404 AISI 316 L
14462 S 31803
1.4828 AISI 309
1.4841 AISI 310
1.4878
Delivery program in higher grades
Delivery program in higher grades
more
Your contact
Produktmanagement Sondergüten
Heike Schwark

Salzgitter Mannesmann Stahlhandel GmbH
Beisenstraße 53
45964 Gladbeck
Germany

Tel.: +49 2043 407-0
Fax: +49 2043 407-991
heike.schwark@szmh-group.com
Your request
Your request